Machining process demo
Review clamping, cutting, and finishing flow so your team can compare it with the current process route.
Videos
Machine and Machining Videos
Videos help overseas buyers understand machine scale, factory reality, machining process, and sample output before asking for a quotation.
Machining video proof
Watch the machining process before sending your drawing.
Use these clips to check clamping, machine movement, cutting route, operator access, and whether your current multi-machine process can be reduced to fewer setups.
VTM live machine motion
See the machine running in the workshop and check motion, access, guarding, and configuration discussion points.
Machine walk-around and work area
Check machine envelope, door opening, spindle area, worktable scale, and operator access before RFQ.
VTM-800 videos
Additional VTM-800 live machine clips
Short clips show the real machine from different angles. Use them together with drawings and specifications; final suitability still depends on your workpiece data.
Machine walk-around clip
Control-side detail clip
Longer live machine clip
Workshop machine clip
Video RFQ prompts
Use each machine clip to ask a drawing-based CNC question.
Machine videos create inquiry value when they connect motion proof with a specific workpiece, process problem, and quotation data.
Valve body / pump casting
Check sealing faces, bores, drilling, tapping, and turning access after watching the clip.
RFQ data: Send drawing, OD, height, material, tolerance issue, and current setup route.
Hub / brake drum
Check whether OD, face, bore, bolt-circle, and balance-critical features can stay in one vertical clamping route.
RFQ data: Send part weight, max diameter, fixture concern, monthly quantity, and target cycle-time pressure.
Bearing ring / heavy ring
Check table load, swing, rigidity, chip flow, inspection access, and repeatability before comparing VTM models.
RFQ data: Send ring section, material, tolerance, flatness, surface finish, and current machine list.
Short machine-action clip
Use the video as a first proof point, then ask for a drawing-based fit check instead of a generic brand list.
RFQ data: Send photo or STEP file plus the bottleneck operation that now causes transfers or reclamping error.
Short CNC video sourcing path
Turn each short machine-action video into one CNC sourcing question.
Short videos work best when each clip points to a specific buyer decision: machine envelope, process consolidation, fixture risk, or the data needed for a VTM fit check.
30-second vertical turning clip
Ask whether OD, face, bore, drilling, tapping, and turning can stay in one vertical clamping route.
RFQ data: Send OD, height, material, tolerance issue, current process route, and monthly quantity.
Worktable or loading clip
Ask whether table load, swing, machining height, lifting access, and door opening match the real workpiece.
RFQ data: Send part weight, clamping face, lifting limit, max diameter, and target destination country.
Live-tool or C-axis clip
Ask which drilling, tapping, milling, boring, or optional grinding steps can move out of separate machines.
RFQ data: Send the current machine list, bottleneck operation, and tolerance feature that causes reclamping risk.
Route review CTA
Use the clip to start one drawing-based fit check, not a broad brand conversation.
RFQ data: Send one drawing, photo, STEP file, or sketch so engineering can say fit, partial fit, or not the right process.
Short machine-demo benchmark
Use a repeatable CNC video post pattern that can turn attention into RFQ data.
A low-cost machine demo works when the video title, first motion, caption, and call to action all point to one part-family sourcing question.
Machine type + swing/load + application
Example: VTM 1500 for valve body, pump casing, flange, hub, bearing ring, or brake drum review.
Show motion proof before claims
Open with table, loading, clamping, live tool, C-axis, cutting, grinding, or finished surface.
Caption asks one buyer decision
Ask whether the part can move from several machines into fewer vertical turning / turn-mill setups.
Send one drawing for a short-video fit check
Ask for OD, height, weight, material, tolerance issue, current process route, and monthly quantity.
Video-to-RFQ path
Turn a machine video review into a drawing-based VTM fit check.
- Send the part drawing, photo, or STEP file after checking machine motion and work area.
- List OD, machining height, material, part weight, current setup route, and tolerance issue.
- Ask whether turning, milling, drilling, tapping, boring, or grinding can move into fewer setups.
Quick RFQ
Start with one contact method.
Only name, company, country, and either email or WhatsApp / phone are required to start. Add drawing, material, process route, tolerance, and quantity now if available, or send them later by email or WhatsApp.
Required to start: name, company, country, plus email or WhatsApp / phone.