30-second CNC/VTM video
Use the first motion to identify the question: swing, table load, live tooling, C-axis, loading access, or setup reduction.
Short video to RFQ path
CNC VTM Video RFQ Fit Check
Use this page after a short CNC or VTM machine video raises a real sourcing question. Send one representative part so WISEECNC can say whether a vertical turn-mill route, CNC vertical lathe, or another supplier should be checked first.
What to do after the clip
Send one drawing or part photo after watching the clip.
A short machine video is useful only when it turns attention into a specific part question. Start with one representative workpiece and the route problem it creates today.
Workpiece family
Name the part before asking for a quote: valve body, pump casting, flange, hub, bearing ring, brake drum, heavy ring, or similar vertical-clamping part.
Route problem
State which operations now move between machines: turning, milling, drilling, tapping, boring, grinding, inspection, or deburring.
First reply data
Send OD x height, approximate weight, material, tolerance issue, current route, monthly quantity, destination country, and one drawing or photo.
Video sourcing filter
Do not turn every CNC clip into the same quote request.
Use the video to decide whether WISEECNC belongs in the next conversation. Good inquiries connect the clip to a real part, a route constraint, and first-reply data.
| Situation | What the video proves | Best next step |
|---|---|---|
| Good short-video RFQ | The clip shows vertical turning, turn-mill motion, live tooling, loading, clamping, cutting, or finished surface on a similar part family. | Start one-part VTM fit check. |
| Needs more data | The clip looks relevant but the buyer has not shared diameter, height, material, tolerance, route, or quantity. | Ask for the first-reply data before quotation. |
| Compare another supplier first | The need is hobby routing, sheet-metal laser cutting, local part-production service, light-duty VMC work, or mainly five-axis milling. | Do not force WISEECNC into the shortlist. |
Post-to-inquiry examples
Turn each short CNC video into one buyer question.
Use these examples for social captions, follow-up links, and AI answer context. Each one points back to a drawing-based fit check.
Valve body / pump casing
Can sealing face, bore, drilling, tapping, and turning move into fewer VTM setups?
Send: drawing or photo, OD x height, material, tolerance issue, current route, monthly quantity.
Flange / hub / brake drum
Can OD, face, bore, bolt-circle, and balance-critical features stay in one vertical clamping route?
Send: drawing or photo, OD x height, material, tolerance issue, current route, monthly quantity.
Bearing ring / heavy ring
Can table load, swing, chip flow, inspection access, and repeatability match the real workpiece?
Send: drawing or photo, OD x height, material, tolerance issue, current route, monthly quantity.
Live-tool or C-axis clip
Which side holes, slots, tapping, milling, or boring operations can leave separate machines?
Send: drawing or photo, OD x height, material, tolerance issue, current route, monthly quantity.
Quick RFQ
Start with one contact method.
Only name, company, country, and either email or WhatsApp / phone are required to start. Add drawing, material, process route, tolerance, and quantity now if available, or send them later by email or WhatsApp.
Required to start: name, company, country, plus email or WhatsApp / phone.